Official guides / Enrolment & course planning
Course transfer - Course Information
Monash University
Last checked: 25 Oct 2026 UTCWhat this page covers
Page text
Text and tables taken from the official page, with collapsed sections opened, so it can be read and searched here. Images and forms are not copied, so open the original page when you need to apply or submit something.
The faculty offers transfers into its courses subject to availability of places.
The following information applies to:
- Current engineering students applying to transfer into another engineering program
- Monash students external to the faculty applying to transfer to an engineering program
- Non Monash students from an Australian institution applying to transfer into an engineering program
- Students studying non award single units at Australian institutions applying to enter an engineering program.
Eligibility
Prerequisites
- You will need to have met the course prerequisites
- If you have not met the course prerequisites at Monash or via an Australian Year 12, IB or A Levels you will need to provide unit outlines/syllabus for the prerequisite assessment
- Prerequisites must be completed within the past 5 years.
Minimum averages required to be considered for an offer
- Selection is a competitive process. The average required to be offered a place in a course may be higher than the percentage listed below as the strength of the applicant pool and the places available vary from year to year
- We use the entire academic record as part of the selection considerations.
| Courses | Minimum requirements for consideration* |
|---|---|
| BE(Hons) single degree | - Applicants with an achieved ATAR of less than 80.00 or equivalent** need to have completed one year of equivalent full-time study load (1 EFTSL) or 48 credit points of bachelor level study at Monash with a minimum 60% average. - Applicants with an achieved ATAR of above 80.00 or equivalent need to have completed six months of equivalent full-time study load (0.5 EFTSL) or 24 credit points of bachelor level study at Monash with a minimum 60% average. |
| BE(Hons) double degrees with Architecture, Arts, Computer Science, Design, Information Technology, Pharmaceutical Science, Science | - Applicants with an achieved ATAR of less than 80.00 or equivalent** need to have completed one year of equivalent full-time study load (1 EFTSL) or 48 credit points of bachelor level study at Monash with a minimum 70% average. - Applicants with an achieved ATAR of above 80.00 or equivalent need to have completed six months of equivalent full-time study load (0.5 EFTSL) or 24 credit points of bachelor level study at Monash with a minimum 70% average. |
| BE(Hons)/BCom | - Applicants with an achieved ATAR of less than 80.00 or equivalent** need to have completed one year of equivalent full-time study load (1 EFTSL) or 48 credit points of bachelor level study at Monash with a minimum 75% average. - Applicants with an achieved ATAR of above 80.00 or equivalent need to have completed six months of equivalent full-time study load (0.5 EFTSL) or 24 credit points of bachelor level study at Monash with a minimum 75% average. |
| BE(Hons)/BBiomedSc | Applicants with an achieved ATAR of less than 85.00 or equivalent need to have completed one year of equivalent full-time study load (1 EFTSL) or 48 credit points of bachelor level study at Monash with a minimum 75% average. |
| BE(Hons)/ME Masters Accelerated Program | If you are in the BEng(Hons) single and would like to be considered for the BE(Hons)/ME Master's Accelerated Program, submit a request for course advice . Applicants must have completed 96 credit points, achieved a minimum WAM of 75%, and are not in the Biomedical Engineering/Software Engineering specialisation. If you have completed Engineering level 3 and 4 technical electives, you will not be considered for the BE(Hons)/ME Master's Accelerated Program as you will not be able to accelerate. |
* SFR grades are not included in the average (WAM) calculation** or no formal secondary results.
Malaysia campus to Clayton campus transfer
For information on students transferring from Monash Malaysia to Monash Australia, visit our Campus Transfer webpage.
Application process: Monash students
To submit an application, visit the course or campus transfer webpage. Closing dates are published on the webpage. You must have a minimum of 24 credit points remaining in your current course to transfer. Applications are assessed for credit transfer as part of the selection process. If you're on a scholarship, you should first check with the Scholarships Unit whether a transfer will affect your eligibility. If you are made an offer you'll be subject to the faculty's new HWA rules.
| Semester 1 Courses available | Engineering single degree Engineering double degree with Architectural Design, Design, Arts, Biomedical science, Commerce, Computer Science, Information Technology, Pharmaceutical science, Science |
| Semester 2 Courses available | Engineering single degree (except the Biomedical engineering specialisation) Engineering double degree with Arts, Commerce, Computer Science, Information Technology, Science |
Application process: non-Monash students
Domestic applicants apply via VTAC. International applicants apply direct to Monash.